What Changes Would You Make to A Meg?

bluedjango1 · 3rd April 2008, 20:08

it really is quite simple...

fourth cell holder standard
BOV standard
pre scrubber O2 solenoid injection
deco info or at least timers in the handsets
manifold for dil and maybe O2... or better yet, two manifolds for dil and dual 02 on the can
steel 3L tanks standard
radial scrubber standard
a quality tank mounting system standard
insulated plenum
a designer who listens to your input and works with you for customization
a bayonet system for locking the head instead of the POS latches
the ability to run eCCR - mCCR - combination of the two

11 out of 12, nice...

thanks Dude...

I guess it is off to the X-liner store...

Skipbreather · 4th April 2008, 15:12

Just for fun

. And, just because I could

!

Chip · 26th May 2008, 04:23

There has to be someway to make battery changes more user friendly. I have spent too many hours tracking down someone who can make me new batteries instead of diving. There are so many batteries out there. Could someone make a holster or something that would enable me to go to a camera store and buy a battery or two and then dive for 5... 10... or 50... hours.

Shawn · 28th May 2008, 03:21

If you have a Meg you can get the 9v battery adapters from ISC. they work awsome and are cheap.

Quote: (Originally Posted by Chip)

There has to be someway to make battery changes more user friendly. I have spent too many hours tracking down someone who can make me new batteries instead of diving. There are so many batteries out there. Could someone make a holster or something that would enable me to go to a camera store and buy a battery or two and then dive for 5... 10... or 50... hours.

3rd April 2008, 20:08	#111 (permalink)
bluedjango1 New Member Current Rebreather/s: Other CCR Other Rebreather/s: Megalodon Other CCR Join Date: Jan 2007 Location: High Springs Posts: 43	Re: What Changes Would You Make to A Meg? it really is quite simple... fourth cell holder standard BOV standard pre scrubber O2 solenoid injection deco info or at least timers in the handsets manifold for dil and maybe O2... or better yet, two manifolds for dil and dual 02 on the can steel 3L tanks standard radial scrubber standard a quality tank mounting system standard insulated plenum a designer who listens to your input and works with you for customization a bayonet system for locking the head instead of the POS latches the ability to run eCCR - mCCR - combination of the two 11 out of 12, nice... thanks Dude... I guess it is off to the X-liner store...
(Offline)

26th May 2008, 04:23	#113 (permalink)
Chip New Member Current Rebreather/s: Megalodon Other Rebreather/s: Join Date: Dec 2005 Location: Colorado Posts: 2	Re: What Changes Would You Make to A Meg? There has to be someway to make battery changes more user friendly. I have spent too many hours tracking down someone who can make me new batteries instead of diving. There are so many batteries out there. Could someone make a holster or something that would enable me to go to a camera store and buy a battery or two and then dive for 5... 10... or 50... hours.
(Offline)

28th May 2008, 03:21	#114 (permalink)
Shawn RBW Member Current Rebreather/s: Megalodon Other CCR RB80 / Clone Other Rebreather/s: Other CCR RB80 / Clone Join Date: Oct 2007 Location: Kansas City Kansas Posts: 157	Re: What Changes Would You Make to A Meg? If you have a Meg you can get the 9v battery adapters from ISC. they work awsome and are cheap. Quote: (Originally Posted by Chip) There has to be someway to make battery changes more user friendly. I have spent too many hours tracking down someone who can make me new batteries instead of diving. There are so many batteries out there. Could someone make a holster or something that would enable me to go to a camera store and buy a battery or two and then dive for 5... 10... or 50... hours.
(Offline)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode